微機控制空氣彈簧高速拉壓力試驗機
1.簡介
該微機控制空氣彈簧高速拉壓力試驗機用于氣彈簧物理性能檢測,可自動完成氣彈簧的整個循環測試環境,測定氣彈簧的物理性能參數,可保存及打印試驗結果,也可用于氣彈簧的拉力,壓力,位移,曲線等試驗和分析,適用于氣彈簧制造和使用行業,科研院校等部分.該微機控制氣彈簧試驗機的試驗速度可達2000mm/min,產品可定制單工位,雙工位,三工位等,滿足同時測定多個氣彈簧試樣,節省試驗時間.
2.技術參數
序號 | 項目 | 規格 |
1 | 試驗力 | 100N,200N, 500N, 1KN, 2KN, 5KN, 10KN |
2 | 試驗力測量范圍 | 1%-99%FS |
3 | 試驗力測量準確度 | 優于示值±1% |
4 | 橫梁位移測量精度 | 0.01mm |
5 | 位移測量準確度 | ±1% |
6 | 變形測量范圍 | 0.4%-99%FS |
7 | 變形測量精度 | ±0.5% |
8 | 變形分辨率 | 0.01mm |
9 | 力控速率調節范圍 | 0.005-5%FS/S |
10 | 力控速率相對誤差 | ±1%設定值以內 |
11 | 變形速率調節范圍 | 0.02-5%FS/S |
12 | 變形控制速率相對誤差 | 速率＜0.05％FS時，為±2%設定值以內； 速率≥0.05％FS時，為±0.5%設定值以內； |
13 | 橫梁速度測量范圍 | 0.1-2000mm/min |
14 | 橫梁速度相對誤差 | 速率＜0.01 mm/min時，設定值的±1.0%以內； 速率≥0.01 mm/min時，設定值的±0.2%以內； |
15 | 恒力、恒變形、恒位移控制范圍 | 0.5％～100％FS |
16 | 恒力、恒變形、恒位移控制范圍 | 設定值<10%FS時，設定值 的±1.0%以內 設定值≥10%FS時,設定值的±0.1%以內 |
17 | 變形速率控制精度 | 速率<0.05%FS時為±2.0%設定值內 速率≥0.05%FS時為±0.5%設定值內 |
18 | 拉伸空間 | 700mm |
19 | 工作環境 | 室溫—35℃,相對濕度不超過80% |
20 | 整機電源 | 單相,220V±10%,50Hz |
21 | 電機功率 | 0.75KW |
22 | 主機尺寸 | 750x480x1700mm |
23 | 重量 | 280kg |
Computer controlled air spring high-speed tension and compression universal testing machine
1 Introduction
The microcomputer controlled air spring high-speed tension and compression universal testing machine is used for the physical performance testing of the gas spring, can automatically complete the entire cycle test environment of the gas spring, determine the physical performance parameters of the gas spring, can save and print the test results, and can also be used for the gas spring The test and analysis of tension, pressure, displacement, curve, etc. are suitable for gas spring manufacturing and use industries, scientific research institutions and other parts. The maximum test speed of this microcomputer-controlled gas spring universal testing machine can reach 2000mm/min, and the product can be customized. Stations, double stations, three stations, etc., can meet the requirement of measuring multiple gas spring samples at the same time, saving test time.
2. Technical parameters
No | Item | Specification |
1 | Force capacity | 100N, 200N,500N,1KN, 2KN,5KN,10KN |
2 | Measuring range | 1%-99%FS |
3 | Accuracy of force value | Less than ±1% of set value |
4 | Precision of displacement | 0.01mm |
5 | Accuracy of displacement value | ±1% |
6 | Deformation measuring range | 0.4%-99%FS |
7 | Accuracy of deformation measuring | ±0.5% |
8 | Resolution of deformation | 0.01mm |
9 | Force speed range | 0.005-5%FS/S |
10 | Accuracy of force speed | Less than ±1% of set value |
11 | Deformation speed range | 0.02-5%FS/S |
12 | Accuracy of deformation speed control | When set value is less than 0.05%FS，error is less than ±2.0% of set value When set value is more than 0.05%FS，error is less than ±0.5% of set value |
13 | Displacement speed range | 0.1-2000mm/min |
14 | Accuracy of displacement speed | When speed is less than 0.01mm/min，error is less than ±1.0% of set value When set value is more than 0.01mm/min，error is less than ±0.2% of set value |
15 | Range of constant force, constant deformation, constant displacement control | 0.5％～100％FS |
16 | Accuracy of constant force, constant deformation, constant displacement control | When set value is less than 10%FS，error is less than ±1.0% of set value When set value is more than 10%FS，error is less than ±0.1% of set value |
17 | Accuracy of deformation speed | When set value is less than 0.05%FS，error is less than ±2.0% of set value When set value is more than 0.05%FS，error is less than ±0.5% of set value |
18 | Tension space | 700mm |
20 | Voltage | Single phase,220V±10%,50Hz(110V) |
21 | Motor power | 0.75KW |
22 | Dimension | 750x480x1700mm |
23 | Weight | 280kg |
