詳情介紹：
平行梁傳感器CKY-101A
產品出廠時經過四角調整，保證其在規定的受載平面內各點輸出一致，可用于制造由單支傳感器構成的各種形式的電子秤、專用秤。
Corner adjusted before delivery to ensure consistent output in stated load plan, can be used to constitute a various forms of electronic scales, special scales which manufactured by a single sensor.量程 Range 200,300,500,700,1000(kg)
技術參數 Technical Parameter
| 額定載荷 Rated Load | 200～1000(kg) |
| 綜合精度 Comprehensive Precision | 0.02(線性+滯后+重復性) |
| 靈敏度 Sensitivity | 2.0 mV/V |
| 蠕變 Creep | ±0.02 %F·S/30min |
| 零點輸出 Zero Output | ±1 %F·S |
| 零點溫度影響 Temperature Effect On Zero | ±0.02%F·S/10℃ |
| 輸出溫度影響 Temperature Effect On Output | ±0.02%F·S/10℃ |
| 工作溫度 Operating Temperature Range | -20℃～+65℃ |
| 輸入阻抗 Input Resistance | 380±10 Ω |
| 輸出阻抗 Output Resistance | 350±3 Ω |
| 絕緣電阻 Insulation Resistance | >5000 MΩ |
| 安 全過載 Safe Load Limit | 150% F·S |
| 供橋電壓 Bridge Voltage | 建議 10VDC |
| 材質 Material | 合金鋼或不銹鋼 Alloy Steel or Stainless Steel |
| 傳感器接線方式 Load Cell Mode of Connection | 輸入+:紅 Input+:Red 輸入-:黑 Input-:Black 輸出+:綠 Output+:Green 輸出-:白 Output-:White |
外型圖 Appearance Picture 尺寸 Size(mm)
