電動折彎機工作原理：
       1.Laid firmly  fixed samples assigned to  the  base plate
       2.Fixed  distance  control :tailored to the distance spcified  by  moving the pusher UNIT fisde lever.
       3.Using cut height adjustment ,adjust the height of the sample push rod untill it touches the sample.
       4.Speed controller  to  specify  the speed to match  the volume using the lever on the grid alignment (set the table below)
電動折彎機判斷基準：
        Test  Method
         Test the method and order of the methods listed above settings are the  same
        Verdict  standard
       Details  of  Samsung or Ship SFEC test specification must be  followed
        Equipment  Operation Processor
       AC Mator rotational  movement of the gear by rorating the pusher  the sample should be banding
     Sample is fixed on the base .the constans power and speed pusher  deflection occurs and check  the changes of the resulting samples 
       Material:aiuminum  /sus303/profile
      Size:440mmL*320W*500H
     Weight:20KG
     electrical :220V.60HZ.25W