當前位置：深圳市智檢系統有限公司>>德國SCHLODER施羅德>>德國SCHLODER 模擬器-太陽光模擬器

德國SCHLODER 模擬器-太陽光模擬器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號VIS 740

品牌

廠商性質代理商

所在地深圳市

在線詢價 收藏產品

聯系方式：劉小姐查看聯系方式

更新時間：2017-10-25 15:56:33瀏覽次數：230次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  德國SCHLODER施羅德

全部產品列表

暫無信息

深圳市智檢系統有限公司

經營模式：代理商

商鋪產品：753條

所在地區：廣東深圳市

聯系人：劉小姐（經理）

詢價 給他留言

產品簡介

產地	進口	加工定制	否

德國SCHLODER 模擬器
品牌：德國SCHLODER
型號：VIS 740
產品名稱：模擬器
描述：測試靜電放電發生器simulates SESD 216 AS中定義的IEC / EN標準
產品要求。

詳細介紹

德國SCHLODER 模擬器

VIS 740
Voltage drop acc.
IEC / EN 61000-4-11
Introduction:
With the combination voltage interruption simulator VIS 1700 / VIS 700 and the step

德國SCHLODER 模擬器

transformer VIS 740
voltage drop tests according the standard are possible – see chapter 5.1 of the standard. The step
transformer fulfilled the standard requirement regarding the high stability of the voltage. Other variable
transformers or variacs are not useful usually. The switching of the voltages to 80%, 70%, 40% or 0% is
performed by the position of the jumpers on the front panel.

Technical Data
Input voltage: 230 Volt, 50 Hz
Input current: 16 A
Output voltage: 4 steps: 0 %, 40 %, 70 %, 80 %
Output current: 16 A continuous
40 A until 5 second at 40 %
23 A until 5 second at 70 %
20 A until 5 second at 80 %
Voltage changing under < 5 % at 40 % from 0 A until 40 A
load with VIS 1700: < 5 % at 70 % from 0 A until 23 A

< 5 % at 80 % from 0 A until 20 A
The percentage (%) information refers to the reference voltage of 230 Volt.
The voltage drop in the generator VIS 1700 is taken into the account.
Dimension: 255 x 355 x 310 mm (B x D x H)
Weight: 27,0 kg
Start-up:
1. The special connector from the VIS 740 must connect to the voltage interruption simulator VIS 1700
- on his back side to connector [37] – see manual page 8.
2. Selection of the voltage drops in percent – 80%, 70%, 40% or 0%. The plug-in bridge of the VIS 740
is setting from factory-side to 80% - see picture above. Other voltage drop levels are selectable by
reposition the plug-in bridge.
At the function “voltage drop” (chapter 5.5, page 10) the generator (VIS 1700) switched between the
rated voltage () to the second voltage (e.g. 80%) – see also user manual VIS 1700.