德國Kleinwaechte集成微控制器
EFM 122（336.122.0）
與EFM 122你可以在一個預先選擇的距離的電極和測量對象之間的測量對象的潛力在伏。可以測量和測量正負極性的電荷和場。你可以選擇測量間距1cm、2cm、5cm、10cm和20cm。集成微控制器將測量的場強自動轉換為伏特中的等效電勢的電荷。電位高的超過1000V顯示在千伏。方便的設計與單獨的測量電極和數據鎖定功能，使測量的地方，你已經集中定位電極出于安全原因。
請注意：該儀器只包含一個簡單的DOS軟件的串行接口。利用電腦我們喜歡我們的其他儀表模擬接口±1V和我們的UAC 110智慧讀出軟件！！
德國Kleinwaechte集成微控制器
規格：
尺寸:
手持單元：70毫米x 122mm×26毫米（長x寬x高）
測頭：Ø36毫米x 136mm
Weight：
手持式130克（無蓄電池），測頭190克
電源：
9v鎳氫蓄電池充電器DC 12 V
測量范圍：
距離1厘米：0…10千伏zui大分辨率1 V
距離2厘米：0…20千伏zui大分辨率2 V
距離5厘米：0…50千伏zui大分辨率10 V
距離10厘米：0…100千伏。zui大分辨率10 V
距離20厘米：0…200千伏。zui大分辨率20 V
顯示器：雙間距字母數字12位LCD顯示器
操作時間：約2標準電池模式
校準:
在一個平板電容均勻場，板尺寸100mm×100mm，板間距為20mm，調制器系統安裝中心
的供貨范圍
efm-122傳感器絕緣帽
9v鎳氫蓄電池，充電器12v
手冊
宣言的校準
導電泡沫內部運輸箱
帶鱷魚夾的接地螺旋電纜
dos PC軟件與串行連接電纜
EFM 122 (336.122.0)
With the EFM 122 you can measure the potential of an object in Volt over a pre-selectable distance between the electrode and the measuring object. Charges and fields of positive and negative polarity can be located and measured. You can select the measuring distance between 1cm, 2cm, 5cm, 10cm and 20cm. The integrated micro controller converts the measured field intensity automatically to the charge of an equivalent potential in Volt. Potentials higher than 1000V are displayed in kV. The handy design with separate measuring electrode and the data latching feature enable measuring at places where you have concentrate on positioning the electrode for safety reasons.
Please Note: This instrument includes only a serial Interface with a simple DOS Software. To use at a PC we prefer one of our other instruments with analoque Interface ±1V and our UAC 110 wit the ReadOut Software !!
Specifications:
Dimensions:
Hand-held unit: 70mm x 122mm x 26mm (L x W x H)
Gage head: Ø 36mm x 136mm
Weight:
Hand-held unit 130 g (without storage battery), gage head 190 g
Power supply:
9V NiMH storage battery with charger DC 12 V
Measuring ranges:
distance 1 cm : 0.....10 kV max. resolution 1 V
distance 2 cm : 0.....20 kV max. resolution 2 V
distance 5 cm : 0.....50 kV max. resolution 10 V
distance 10 cm : 0...100 kV max. resolution 10 V
distance 20 cm : 0...200 kV max. resolution 20 V
Display: Double spaced alphanumeric 12-digit LCD display
Operating time: Approx. 2 Std. in battery mode
Calibration:
In homogenous field of a plate capacitor, plate size 100mm x 100mm, plate distance 20mm, modulator system mounted centered
Scope of delivery
EFM-122 sensor with insulation cap
9V NiMH storage battery, charger 12V
Manual
Declaration of calibration
Transport case with conductive foam interior
Grounding spiral cable with alligator clip
DOS PC software and serial connection cable
