天蝶閥門電動執行器針對閥門的預測維護

electric actuator predictive maintenance of valves

操作人員可以借助電動執行器內置的數據存儲器來記錄閥門每次動作時力矩感應裝置測得的數據，這些數據可以用來監測閥門運行的狀態，可以提示閥門是否需要維修，也可以用這些數據來診斷閥門。

The operating personnel can use the built-in data memory of the electric actuator to record the data measured by the torque sensor at each action of the valve. These data can be used to monitor the state of valve operation and can indicate whether the valve needs to be repaired, and also can use these data to diagnose valves.

針對閥門電動執行器可以診斷如下數據:

The following data can be diagnosed for the valve of the electric actuator:

1.閥門密封或填料摩擦力
1.Valve seal or filler friction
2.閥桿、閥門軸承的摩擦力矩
2.Friction torque of valve stem and valve bearing
3.閥座摩擦力
3.Seat friction force
4.閥門運行中的摩擦力
4.Friction force in operation of valve
5.閥芯的所受的動態力
5.The dynamic force of the valve core
6.閥桿螺紋摩擦力
6.Friction force of stem thread
7.閥桿位置
7.Valve stem position

上述大部分數據存在于所有種類的閥門，但著重點不同，例如:對于蝶閥，閥門運行中的摩擦力是可以忽略的，但對于旋塞閥這個力數值卻很大。不同的閥門具有不同的力矩運行曲線，例如:對于楔式閘飯，開啟和關閉力矩都非常大，其它行程時只有填料摩擦力和螺紋摩擦力，關閉時，液體靜壓力作用在閘板上增加了閥座摩擦力，終楔緊效應使力矩迅速增大直到關閉到位。所以根據力矩曲線的變化可以預測出將會發生的故障，可以對預測性維護提供有價值的信息。

Most of the above data exist in all types of valves, but the focus is different. Such as butterfly valves, the friction in the operation of the valve is negligible, but the force value of the plug valve is very large. Different valves have different torque running curves. For example, wedge-type flashboard, the opening and closing moments are very large. In other strokes, there are only filler friction and thread friction. When closed, the static pressure of the liquid increases the seat friction on the gate, and the final wedge effect causes the torque to increase rapidly until it is closed. Therefore, according to the change of the torque curve can predict the faults that will occur, and can provide valuable information for predictive maintenance.